Product

MetriQ

Vision inspection, built into the line you already run.

MetriQ watches your product as it moves and flags problems in real time — like your most productive QC employee, on every unit, without getting tired.

MetriQ inspection cell — camera mounted over the conveyor.
MetriQ inspection cell — camera mounted over the conveyor.
parts per second
100+
inference
Real-time
accuracy
<1mm
defects caught
>99.5%

Every part, measured live

See the camera view, the last product and the averages for length, width and height. Export the data when you need it.

MetriQ dashboard on a lemon line: raw and AI camera views side by side, the last lemon with its length, width and height, and a summary of the last hour
MetriQ dashboard preview, with sample data.

What MetriQ does

CapabilityWhat it does on your line
Defect detectionChecks every part against your quality criteria and flags the ones that fail.
Anomaly detectionSpots parts that look different from good ones, including defects it was never shown.
Object detectionFinds and identifies each part in the camera view, whatever its position on the belt.
TrackingFollows each part along the conveyor, so every result stays tied to the right unit.
Counting & sortingCounts parts as they pass and sorts them by result or type.
Reject integrationSignals your reject system to remove defective parts automatically.
Report generationProduces reports of counts and defect rates by shift or batch.

Unmatched data monitoring

MetriQ helps you monitor your production with AI recommendations. It compares every measurement with its tolerance, ranks what needs attention first and tells you what to check.

  • Spots a size drifting toward its limit before parts fail.
  • Ranks issues by how much of the tolerance they use.
  • Counts accepted and rejected parts by hour and by shift.
  • Exports every measured part to CSV or Excel.
MetriQ measurements screen with AI recommendations at the top: height is drifting up, cracks are over the allowed rate, width has little margin. Below them, parts counted, accepted and rejected, and target against actual for length, width, height and cracks
Measurements screen with AI recommendations, sample data.

Why it matters

  • Fewer defective units reaching packing or your customer.
  • Works with your reject system, so defective parts are removed automatically.
  • Consistent product quality: the same QC standard on every shift, every unit.
  • Proactive prevention: line faults show up early, before they turn into a run of scrap.
  • Your QC team spends time on exceptions, not watching the line.
  • Fits onto the line you already run — no process redesign.

In practice

MetriQ camera view of a parts conveyor: two M4×20 screws and an M3×6 screw outlined green as pass; two broken bolts, a part in the wrong orientation and a capacitor outlined red as rejects
Parts on a conveyor — good parts in green, rejects in red with the reason.

Getting started

  1. Line survey

    We look at your product, line speed and current reject process.

  2. Install & calibrate

    Trained on your defects, not generic examples.

  3. Run alongside your team

    Operators confirm it before it takes over.

See MetriQ on your product

Start with a line survey. Tell us your product, line speed and current reject process.

Contact us